ネットに接続できません
Posted: 16/02/08(月) 14:39
初めまして、
HDDや光学ドライブがイカレたのを機に、LxPupを起動することができました。
今後ともよろしくお願いします。
●さっそくですが、ネットに接続できません。
有線ネット接続したいのですが、その方法を教えてください。
PCスキルは無い者です。
何を説明すればよいのか分からず、思いついた所をとりあえず書いています。
足りない項目を拾い出す方法やその後の操作など教えてください。
●状況:
LxPup-15.11.3-s-pae.isoをYUMI-2.0.2.0.exeでマルチブートUSBメモリを作りました。
BIOS順序を切り替えてLxPup15.11-paeが起動できました。
ネットワークセットアップウィザードでLAN接続できた感じだったのですが、
(Proxy server setupの、Enable Internet connection through proxy server
に、チェックをいれていません。)
Firefoxでは、
Server not found
Firefox can't find the server at http://www.mozilla.org.
Check the address for typing errors such as ww.example.com instead of http://www.example.com
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is
permitted to access the Web.
と、でます。
オンライン辞書も外部には通じてないようで、
Cannot connect to any servers (use -v to see why)
と、でます。
同PCのWindows(まだ、何とか起動できます)では、ブラウジングできます。
無線は持っていません。
回線はフレッツ光隼で PC→LAN線→NTT提供の【PR-500KI】→ファイバー線→屋外です。
●今まで拾った項目:PSIから・・
(拾い出す途中での設定変更はしていません。)
Pup-SysInfo Hardware Report (Summary),月8 2月2016
Current Time: 10:51:06
System Uptime: 3 hr 59 min
Load Average: 0.01 0.05 0.09
▶—— BASE SYSTEM ——◀
PC Manufacturer: FUJITSU
Product Name: FMVNFB50
Motherboard Vendor: FUJITSU
Product Name: FJNB1E0
BIOS Vendor: FUJITSU // Phoenix Technologies Ltd.
Version: Version 1.12
Release Date: 07/10/2008
Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz
Max Speed: 2100 MHz
Current Speed of Core 0:2101 MHz, 1:2101 MHz
Frequency governor : ondemand
Freq. scaling driver : acpi-cpufreq
Core 0 (coretemp) : +53.0 C (high = +105.0 C, crit = +105.0 C)
Core 1 (coretemp) : +57.0 C (high = +105.0 C, crit = +105.0 C)
Personal Storage File:
Name: lxpupsave-●●●●●●●.3fs
Total Size: 512 MB
Free Space: 468 MB
Location: partition sdb1
Memory Allocation:
Total RAM: 2007 MB
Used RAM: 1069 MB
Free RAM: 938 MB
Buffers: 92 MB
Total Swap: 0 MB
Free Swap: 0 MB
Linux Kernel: 4.2.5-EmSee-32-pae (i686)
Kernel Version: #1 SMP Mon Nov 2 10:21:44 GMT 2015
PAE Enabled: Yes
Distro: LxPup 15.11
Desktop Panel: lxpanel 0.6.0-r694
Window Manager: Openbox 3.6.1
Desktop Start: xwin startlxde
Development:
Bash: 4.2.53
Geany: 1.25
Gtkdialog: 0.8.4
Perl: 5.18.1
--
busybox: 1.23.1
dhcpcd: 6.0.5
GlibC: 2.17
OpenSSL: 1.0.1q 3 Dec 2015, built on: Tue Dec 15 00:44:04 2015
wpa_supplicant: 2.4
Username: root
Language: ja_JP.UTF-8
Keyboard: jp106
Timezone: Asia/Tokyo
Firewall: On (ip_tables active)
Network Status: eth0
Wireless Network: No wireless connection
Session Data: Received 21.0 KB, Sent 10.5 KB
Monthly Data: Received 0 MB, Sent 0 MB
Hostname: puppypc10837
Network IP Address: 192.168.1.5
Domain Name Server (DNS): 192.168.1.1
Hardware Address (MAC): 00:17:42:FD:74:59
Boot Partition: sdb1 (Size 3.7G, Free 2.0G)
Boot File System: vfat
PUPMODE=13
PUPSFS=sdb1,vfat,/multiboot/LxPup-15.11.3-s-pae/puppy_lxpup_15.11.sfs
PUPSAVE=sdb1,vfat,/multiboot/LxPup-15.11.3-s-pae/lxpupsave-●●●●●●●.3fs
"The Lighthouse full-system report is also
available here: /tmp/root/sys-info-160208"
=== sys-info 1.5.1 ===月8 2月2016 on Linux 4.2.5-EmSee-32-pae i686 ===
(See end of report for usage and additional information.)
=== Kernel command line (cat /proc/cmdline) ===
BOOT_IMAGE=vmlinuz initrd=initrd.gz psubdir=/multiboot/LxPup-15.11.3-s-pae psubok=TRUE
=== CPU, Tasks and Uptime ===
Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz
Core 0: @800 1: @800 MHz
137 Tasks, 1 Running. Uptime: 3:55, load average: 0.09, 0.07, 0.10
=== Memory (free) ===
total used free shared buffers
Mem: 2055248 1091728 963520 273624 94352
-/+ buffers: 997376 1057872
Swap: 0 0 0
=== Memory (/proc/meminfo) ===
1805 MiB free (incl. buffers,cache) of 2008 MiB total RAM (shared unaccounted for)
=== Window Manager/Desktop Environment ===
Current window manager: OPENBOX (starts from C.L. with: 'xwin openbox-session')
=== Distro ===
LxPup 15.11 i686
JWM v2.3.2
不明なオプション-vです
=== Network Interface ===
eth0 no Internet
=== User Installed Pkgs (PPM /root/.packages/user-installed-packages) ===
None listed in /root/.packages/user-installed-packages
=== SFS Add-ons (loop mounts /dev/loop4 or above) ===
LibreOffice-5.0.4_ja_xz.sfs
LxPup-15.11.3-s-pae.iso
zdrv_lxpup_15.11.sfs
=== video-info ===
Video-Info 1.5.1 -月8 2月2016 on LxPup 15.11 - Linux 4.2.5-EmSee-32-pae i686
Chip description:
2.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics
Controller (primary) (rev 03)
X Server: Xorg Driver used: intel
X.Org version: 1.14.3
dimensions: 1280x800 pixels (338x211 millimeters)
depth of root window: 24 planes
▶—— Network Devices ——◀
Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet
Controller [11ab:4354] (rev 12)
• Kernel Driver: sky2
• Memory Used: 35.66 KB
• Path: /lib/modules/4.2.5-EmSee-32-pae/kernel/drivers/net/ethernet/marvell/sky2.ko
• Driver Version: 1.30
• Description: Marvell Yukon 2 Gigabit Ethernet driver
Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network
Adapter (PCI-Express) [168c:001c] (rev 01)
• Kernel Driver: ath5k
• Memory Used: 106.72 KB
• Path: /lib/modules/4.2.5-EmSee-32-pae/kernel/drivers/net/wireless/ath/ath5k/ath5k.ko
• Description: Support for 5xxx series of Atheros 802.11 wireless LAN cards.
▶—— ネットワーク情報 ——◀
Firewall: On (ip_tables active)
Network Status: eth0
Wireless Network: No wireless connection
Session Data: Received 16.7 KB, Sent 10.5 KB
Monthly Data: Received 0 MB, Sent 0 MB
Hostname: puppypc10837
Network IP Address: 192.168.1.5
Domain Name Server (DNS): 192.168.1.1
Hardware Address (MAC): 00:17:42:FD:74:59
▶TCP/IP Network Interfaces:
eth0 Link encap:Ethernet HWaddr 00:17:42:FD:74:59
inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:145 errors:0 dropped:0 overruns:0 frame:0
TX packets:76 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:17118 (16.7 KiB) TX bytes:10814 (10.5 KiB)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:254 errors:0 dropped:0 overruns:0 frame:0
TX packets:254 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20140 (19.6 KiB) TX bytes:20140 (19.6 KiB)
▶Kernel IP Routing Table:
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 202 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
192.168.1.0 0.0.0.0 255.255.255.0 U 202 0 0 eth0
192.168.1.5 127.0.0.1 255.255.255.255 UGH 202 0 0 lo
▶Active Internet Connections: (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
▶Network Protocol Statistics:
Ip:
353 total packets received
21 with invalid addresses
0 forwarded
0 incoming packets discarded
254 incoming packets delivered
254 requests sent out
678 outgoing packets dropped
4 dropped because of missing route
Icmp:
124 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 124
130 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 124
echo request: 6
IcmpMsg:
InType3: 124
OutType3: 124
OutType8: 6
Tcp:
3 active connections openings
0 passive connection openings
3 failed connection attempts
0 connection resets received
0 connections established
6 segments received
6 segments send out
0 segments retransmited
0 bad segments received.
3 resets sent
Udp:
0 packets received
124 packets to unknown port received.
0 packet receive errors
124 packets sent
0 receive buffer errors
0 send buffer errors
UdpLite:
TcpExt:
0 packet headers predicted
IpExt:
InBcastPkts: 78
InOctets: 33112
OutOctets: 20140
InBcastOctets: 6084
InNoECTPkts: 353
▶—— System Report (Summary) ——◀
Pup-SysInfo System Report (Summary), æ 8 2æ 2016
Current Time: 10:28:10
System Uptime: 3 hr 36 min
Load Average: 0.04 0.10 0.13
====> BASE STATUS <====
Linux Kernel: 4.2.5-EmSee-32-pae (i686)
Version: #1 SMP Mon Nov 2 10:21:44 GMT 2015
PAE Enabled: Yes
Username: root
Language: ja_JP.UTF-8
Keyboard: jp106
Timezone: Asia/Tokyo
Distro: LxPup 15.11
Desktop Panel: lxpanel 0.6.0-r694
Window Manager: Openbox 3.6.1
Desktop Start: xwin startlxde
Development:
Bash: 4.2.53
Geany: 1.25
Gtkdialog: 0.8.4
Perl: 5.18.1
--
busybox: 1.23.1
dhcpcd: 6.0.5
GlibC: 2.17
OpenSSL: 1.0.1q 3 Dec 2015, built on: Tue Dec 15 00:44:04 2015
wpa_supplicant: 2.4
Firewall: On (ip_tables active)
Network Status: eth0
Wireless Network: No wireless connection
Session Data: Received 18.0 KB, Sent 10.5 KB
Monthly Data: Received 0 MB, Sent 0 MB
Hostname: puppypc10837
Network IP Address: 192.168.1.5
Domain Name Server (DNS): 192.168.1.1
Hardware Address (MAC): 00:17:42:FD:74:59
Boot Partition: sdb1 (Size 3.7G, Free 2.0G)
Boot File System: vfat
PUPMODE=13
PUPSFS=sdb1,vfat,/multiboot/LxPup-15.11.3-s-pae/puppy_lxpup_15.11.sfs
PUPSAVE=sdb1,vfat,/multiboot/LxPup-15.11.3-s-pae/lxpupsave-●●●●●●●.3fs
などです、重複も多く、すごく長くて、すいません。
よろしくお願いします。
HDDや光学ドライブがイカレたのを機に、LxPupを起動することができました。
今後ともよろしくお願いします。
●さっそくですが、ネットに接続できません。
有線ネット接続したいのですが、その方法を教えてください。
PCスキルは無い者です。
何を説明すればよいのか分からず、思いついた所をとりあえず書いています。
足りない項目を拾い出す方法やその後の操作など教えてください。
●状況:
LxPup-15.11.3-s-pae.isoをYUMI-2.0.2.0.exeでマルチブートUSBメモリを作りました。
BIOS順序を切り替えてLxPup15.11-paeが起動できました。
ネットワークセットアップウィザードでLAN接続できた感じだったのですが、
(Proxy server setupの、Enable Internet connection through proxy server
に、チェックをいれていません。)
Firefoxでは、
Server not found
Firefox can't find the server at http://www.mozilla.org.
Check the address for typing errors such as ww.example.com instead of http://www.example.com
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is
permitted to access the Web.
と、でます。
オンライン辞書も外部には通じてないようで、
Cannot connect to any servers (use -v to see why)
と、でます。
同PCのWindows(まだ、何とか起動できます)では、ブラウジングできます。
無線は持っていません。
回線はフレッツ光隼で PC→LAN線→NTT提供の【PR-500KI】→ファイバー線→屋外です。
●今まで拾った項目:PSIから・・
(拾い出す途中での設定変更はしていません。)
Pup-SysInfo Hardware Report (Summary),月8 2月2016
Current Time: 10:51:06
System Uptime: 3 hr 59 min
Load Average: 0.01 0.05 0.09
▶—— BASE SYSTEM ——◀
PC Manufacturer: FUJITSU
Product Name: FMVNFB50
Motherboard Vendor: FUJITSU
Product Name: FJNB1E0
BIOS Vendor: FUJITSU // Phoenix Technologies Ltd.
Version: Version 1.12
Release Date: 07/10/2008
Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz
Max Speed: 2100 MHz
Current Speed of Core 0:2101 MHz, 1:2101 MHz
Frequency governor : ondemand
Freq. scaling driver : acpi-cpufreq
Core 0 (coretemp) : +53.0 C (high = +105.0 C, crit = +105.0 C)
Core 1 (coretemp) : +57.0 C (high = +105.0 C, crit = +105.0 C)
Personal Storage File:
Name: lxpupsave-●●●●●●●.3fs
Total Size: 512 MB
Free Space: 468 MB
Location: partition sdb1
Memory Allocation:
Total RAM: 2007 MB
Used RAM: 1069 MB
Free RAM: 938 MB
Buffers: 92 MB
Total Swap: 0 MB
Free Swap: 0 MB
Linux Kernel: 4.2.5-EmSee-32-pae (i686)
Kernel Version: #1 SMP Mon Nov 2 10:21:44 GMT 2015
PAE Enabled: Yes
Distro: LxPup 15.11
Desktop Panel: lxpanel 0.6.0-r694
Window Manager: Openbox 3.6.1
Desktop Start: xwin startlxde
Development:
Bash: 4.2.53
Geany: 1.25
Gtkdialog: 0.8.4
Perl: 5.18.1
--
busybox: 1.23.1
dhcpcd: 6.0.5
GlibC: 2.17
OpenSSL: 1.0.1q 3 Dec 2015, built on: Tue Dec 15 00:44:04 2015
wpa_supplicant: 2.4
Username: root
Language: ja_JP.UTF-8
Keyboard: jp106
Timezone: Asia/Tokyo
Firewall: On (ip_tables active)
Network Status: eth0
Wireless Network: No wireless connection
Session Data: Received 21.0 KB, Sent 10.5 KB
Monthly Data: Received 0 MB, Sent 0 MB
Hostname: puppypc10837
Network IP Address: 192.168.1.5
Domain Name Server (DNS): 192.168.1.1
Hardware Address (MAC): 00:17:42:FD:74:59
Boot Partition: sdb1 (Size 3.7G, Free 2.0G)
Boot File System: vfat
PUPMODE=13
PUPSFS=sdb1,vfat,/multiboot/LxPup-15.11.3-s-pae/puppy_lxpup_15.11.sfs
PUPSAVE=sdb1,vfat,/multiboot/LxPup-15.11.3-s-pae/lxpupsave-●●●●●●●.3fs
"The Lighthouse full-system report is also
available here: /tmp/root/sys-info-160208"
=== sys-info 1.5.1 ===月8 2月2016 on Linux 4.2.5-EmSee-32-pae i686 ===
(See end of report for usage and additional information.)
=== Kernel command line (cat /proc/cmdline) ===
BOOT_IMAGE=vmlinuz initrd=initrd.gz psubdir=/multiboot/LxPup-15.11.3-s-pae psubok=TRUE
=== CPU, Tasks and Uptime ===
Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz
Core 0: @800 1: @800 MHz
137 Tasks, 1 Running. Uptime: 3:55, load average: 0.09, 0.07, 0.10
=== Memory (free) ===
total used free shared buffers
Mem: 2055248 1091728 963520 273624 94352
-/+ buffers: 997376 1057872
Swap: 0 0 0
=== Memory (/proc/meminfo) ===
1805 MiB free (incl. buffers,cache) of 2008 MiB total RAM (shared unaccounted for)
=== Window Manager/Desktop Environment ===
Current window manager: OPENBOX (starts from C.L. with: 'xwin openbox-session')
=== Distro ===
LxPup 15.11 i686
JWM v2.3.2
不明なオプション-vです
=== Network Interface ===
eth0 no Internet
=== User Installed Pkgs (PPM /root/.packages/user-installed-packages) ===
None listed in /root/.packages/user-installed-packages
=== SFS Add-ons (loop mounts /dev/loop4 or above) ===
LibreOffice-5.0.4_ja_xz.sfs
LxPup-15.11.3-s-pae.iso
zdrv_lxpup_15.11.sfs
=== video-info ===
Video-Info 1.5.1 -月8 2月2016 on LxPup 15.11 - Linux 4.2.5-EmSee-32-pae i686
Chip description:
2.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics
Controller (primary) (rev 03)
X Server: Xorg Driver used: intel
X.Org version: 1.14.3
dimensions: 1280x800 pixels (338x211 millimeters)
depth of root window: 24 planes
▶—— Network Devices ——◀
Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet
Controller [11ab:4354] (rev 12)
• Kernel Driver: sky2
• Memory Used: 35.66 KB
• Path: /lib/modules/4.2.5-EmSee-32-pae/kernel/drivers/net/ethernet/marvell/sky2.ko
• Driver Version: 1.30
• Description: Marvell Yukon 2 Gigabit Ethernet driver
Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network
Adapter (PCI-Express) [168c:001c] (rev 01)
• Kernel Driver: ath5k
• Memory Used: 106.72 KB
• Path: /lib/modules/4.2.5-EmSee-32-pae/kernel/drivers/net/wireless/ath/ath5k/ath5k.ko
• Description: Support for 5xxx series of Atheros 802.11 wireless LAN cards.
▶—— ネットワーク情報 ——◀
Firewall: On (ip_tables active)
Network Status: eth0
Wireless Network: No wireless connection
Session Data: Received 16.7 KB, Sent 10.5 KB
Monthly Data: Received 0 MB, Sent 0 MB
Hostname: puppypc10837
Network IP Address: 192.168.1.5
Domain Name Server (DNS): 192.168.1.1
Hardware Address (MAC): 00:17:42:FD:74:59
▶TCP/IP Network Interfaces:
eth0 Link encap:Ethernet HWaddr 00:17:42:FD:74:59
inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:145 errors:0 dropped:0 overruns:0 frame:0
TX packets:76 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:17118 (16.7 KiB) TX bytes:10814 (10.5 KiB)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:254 errors:0 dropped:0 overruns:0 frame:0
TX packets:254 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20140 (19.6 KiB) TX bytes:20140 (19.6 KiB)
▶Kernel IP Routing Table:
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 202 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
192.168.1.0 0.0.0.0 255.255.255.0 U 202 0 0 eth0
192.168.1.5 127.0.0.1 255.255.255.255 UGH 202 0 0 lo
▶Active Internet Connections: (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
▶Network Protocol Statistics:
Ip:
353 total packets received
21 with invalid addresses
0 forwarded
0 incoming packets discarded
254 incoming packets delivered
254 requests sent out
678 outgoing packets dropped
4 dropped because of missing route
Icmp:
124 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 124
130 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 124
echo request: 6
IcmpMsg:
InType3: 124
OutType3: 124
OutType8: 6
Tcp:
3 active connections openings
0 passive connection openings
3 failed connection attempts
0 connection resets received
0 connections established
6 segments received
6 segments send out
0 segments retransmited
0 bad segments received.
3 resets sent
Udp:
0 packets received
124 packets to unknown port received.
0 packet receive errors
124 packets sent
0 receive buffer errors
0 send buffer errors
UdpLite:
TcpExt:
0 packet headers predicted
IpExt:
InBcastPkts: 78
InOctets: 33112
OutOctets: 20140
InBcastOctets: 6084
InNoECTPkts: 353
▶—— System Report (Summary) ——◀
Pup-SysInfo System Report (Summary), æ 8 2æ 2016
Current Time: 10:28:10
System Uptime: 3 hr 36 min
Load Average: 0.04 0.10 0.13
====> BASE STATUS <====
Linux Kernel: 4.2.5-EmSee-32-pae (i686)
Version: #1 SMP Mon Nov 2 10:21:44 GMT 2015
PAE Enabled: Yes
Username: root
Language: ja_JP.UTF-8
Keyboard: jp106
Timezone: Asia/Tokyo
Distro: LxPup 15.11
Desktop Panel: lxpanel 0.6.0-r694
Window Manager: Openbox 3.6.1
Desktop Start: xwin startlxde
Development:
Bash: 4.2.53
Geany: 1.25
Gtkdialog: 0.8.4
Perl: 5.18.1
--
busybox: 1.23.1
dhcpcd: 6.0.5
GlibC: 2.17
OpenSSL: 1.0.1q 3 Dec 2015, built on: Tue Dec 15 00:44:04 2015
wpa_supplicant: 2.4
Firewall: On (ip_tables active)
Network Status: eth0
Wireless Network: No wireless connection
Session Data: Received 18.0 KB, Sent 10.5 KB
Monthly Data: Received 0 MB, Sent 0 MB
Hostname: puppypc10837
Network IP Address: 192.168.1.5
Domain Name Server (DNS): 192.168.1.1
Hardware Address (MAC): 00:17:42:FD:74:59
Boot Partition: sdb1 (Size 3.7G, Free 2.0G)
Boot File System: vfat
PUPMODE=13
PUPSFS=sdb1,vfat,/multiboot/LxPup-15.11.3-s-pae/puppy_lxpup_15.11.sfs
PUPSAVE=sdb1,vfat,/multiboot/LxPup-15.11.3-s-pae/lxpupsave-●●●●●●●.3fs
などです、重複も多く、すごく長くて、すいません。
よろしくお願いします。